Description

The IS200EDCFG1A is a Direct Current Feedback Card (EX2100) for the Mark VI series from GE.This series is part of the Speedtronic line of gas/steam turbine management systems. The Mark VI is designed to be a complete protection, control and monitoring solution for heavy duty turbine systems used in a variety of applications. The IS200EDCFG1A measures field voltage and field current at the SCR bridge. Field current is measured via a shunt in the DC field circuit. There are seven selector settings on the field voltage circuit to scale down the bridge voltage, if necessary.The IS200EDCFG1A creates an interface to the EISB board within the control panel using a high-speed fiber-optic link. The IS200EDCFG1A is designed with two relays, a single inductor coil, several transistors, and six integrated circuits.The board also has two heat sink components located opposite each other on one short side of the board. Two connectors are located on the board, including a P1 connector that is a 2-position female connector.There is an additional four-input female plug that is labeled input.” The board has several electrolytic capacitors as well as polyester vinyl capacitors and capacitors of other material. The board tends to use metal film resistors.The surface of the IS200EDCFG1A is drilled with four factory-made mounting holes. Most components are labeled. Our team will carefully pack the IS200EDCFG1A for transit to your facility, including the use of anti-static material to protect the board from damage during transit. Please follow all installation procedures as recommended by the manufacturer.