Description

The IS200BPVCG1B is a PCB component (printed circuit board) made for the Mark VI system.The Mark VI is part of General Electric's Speedtronic family of gas and steam turbine management systems.The MKVI is considered a complete protection, control, and monitoring solution for heavy-duty turbine systems. The IS200BPVCG1B is a backplane board designed to fit into the base of a rack system.This board is bisected by the design of the rack, which places the back half of the board inside a deeper portion of the rack system.This half of the board is populated with twenty-one backplane connectors. In this way, when boards are added to these connectors, they will be supported by the surrounding walls of the rack system.The front half of the board remains exposed and is placed upon a shorter section of the rack system. The rack itself is designed with a top hat flange on the left and right edge with screw mounts cut into each flange.This allows for secure installation of the rack into place. It is important to note the rack is a separate component. The front half of the IS200BPVCG1B is populated with thirty-nine male vertical pin ribbon connectors.These are designed for the Input/Output of data from the boards plugged into the backplanes located inside the rack.The backplanes and the connectors are labeled. The board is also populated with fourteen stab-on connectors and six network arrays.The bottom of the board has over thirty components marked L1 through L30.