DS3800DFPF1B1C

DS3800DFPF1B1C MARK 4 GE DRIVE SYSTEMS PRINTED CIRCUIT BOARD

Contact
Us!

Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email

DS3800DFPF1B1C

DS3800DFPF1B1C MARK 4 GE DRIVE SYSTEMS PRINTED CIRCUIT BOARD

  • 5.00 (1)
  • Click a star to rate this product

Availability:

In Stock Ships In 3-5 Days


Description

The DS3800DFPF1B1C is part of the Speedtronics Mark IV series by General Electric (GE). The DS3800DFPF1B1C has four Electronically Erasable Programmable Read Only Memory or EEPROM for short. Each EEPROM comes already programmed with what the circuit board is required to do and can't be changed. Each diode, resistor, EEPROM etc. on the board has a forest green letter and number combination as a label. The board also is labeled DS3800DFPF1B1C in a forest green color as well. Along with U.S.A. and General Electrics seal.

The DS3800DFPF1B1C is meant to control other sections of the machine and features two wiring harnesses to connect to different sections. The lower harness has a smaller connection port while the upper harness is a bit larger. There are also eight gold towers with silver dots on either side which is where another board can connect to the DS3800DFPF1B1C. In order for the board to operate it uses a series of diodes, capacitors, and resistors. There are two reddish-brown capacitors. They are rectangular in shape. There are also two strip capacitors that are connected at ten points. These capacitors are yellow in color. The DS3800DFPF1B1C also has several diodes ranging in size. The smaller diodes are grey or teal in color, while the larges diodes are silver or black. There are also a dozen banded resistors. These resistors hold and transport energy. Each resistor, however, has a limit on how much it can hold which can be identified by the colored stripes on each resistor.

Purchase

Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.

Exchange

We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.

Repair

We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.